PAROC Pin Welding Device

PAROC Pin Welding Device
PAROC capacitor discharge welding device PPWD has been designed for welding directly through the insulation. With this procedure, you fasten the insulation to the surface in one process step.

Datasheet

 
Updated 21 Jun 2021

Other Properties

Other Properties
PropertyValue
Capacitors’ capacitance:66,000 μF
Power supply:230 V, cut out 10 A
Charging current:1,8 A
Quiescent current:0,1 A
Noise level during work:< 79 dB
Welding time:from 2 to 5 ms
Weight:12,5 kg
Dimensions:165 x 250 x 380 mm
Warranty:12 months

Installation

Depending on the final effect you may use two different length of the pins: 1. Quilted surface - for the products up to 50 kg/m3 use the pins with the length little bit smaller than nominal insulation thickness (example: for insulation thickness 30mm use 28,5 mm pin); 2. Flat surface – for all densities use the pins with the length little bit higher than nominal insulation thickness (example: for insulation thickness 30 mm use 30,5 mm pin).

Other Properties

Other Properties
PropertyValue
Capacitors’ capacitance:66,000 μF
Power supply:230 V, cut out 10 A
Charging current:1,8 A
Quiescent current:0,1 A
Noise level during work:< 79 dB
Welding time:from 2 to 5 ms
Weight:12,5 kg
Dimensions:165 x 250 x 380 mm
Warranty:12 months

Installation

Depending on the final effect you may use two different length of the pins: 1. Quilted surface - for the products up to 50 kg/m3 use the pins with the length little bit smaller than nominal insulation thickness (example: for insulation thickness 30mm use 28,5 mm pin); 2. Flat surface – for all densities use the pins with the length little bit higher than nominal insulation thickness (example: for insulation thickness 30 mm use 30,5 mm pin).

Other Properties

Other Properties
PropertyValue
Capacitors’ capacitance:66,000 μF
Power supply:230 V, cut out 10 A
Charging current:1,8 A
Quiescent current:0,1 A
Noise level during work:< 79 dB
Welding time:from 2 to 5 ms
Weight:12,5 kg
Dimensions:165 x 250 x 380 mm
Warranty:12 months

Installation

Depending on the final effect you may use two different length of the pins: 1. Quilted surface - for the products up to 50 kg/m3 use the pins with the length little bit smaller than nominal insulation thickness (example: for insulation thickness 30mm use 28,5 mm pin); 2. Flat surface – for all densities use the pins with the length little bit higher than nominal insulation thickness (example: for insulation thickness 30 mm use 30,5 mm pin).