Accessories for Technical Insulations

PAROC AluCoat Tape is a reinforced aluminum foil tape with pressure sensitive, low temperature acrylic adhesive, siliconized release paper liner and AluCoat printing. Ideal for sealing joints when using PAROC AluCoat products such as sections, lamella mats or slabs. PAROC Tape AluCoat gives a great finish and safe installation.

PAROC BlackCoat Tape is an reinforced aluminum foil tape with a black color lacquer finish acrylic pressure sensitive adhesive and siliconized release paper liner.

It is an ideal for sealing the joints when using PAROC BlackCoat products such as sections, lamella mats or slabs. PAROC BlackCoat Tape gives a great finish and safe installation.

PAROC Clad Tape is a lasting water resistant butyl rubber tape with very high tack and very high ageing resistance. It is used amongst others for masking of Clad faced products. The butyl sealing tape can be used as moisture and diffusion barriers.

It is an ideal for sealing the joints when using PAROC Clad products. Permanently seal pipes and ventilation ducts facings in heating, ventilation and air conditioning engineering. The butyl sealing tapes are also used as moisture and diffusion barriers in underground construction. PAROC Clad Tape gives a great finish and safe installation.

PAROC Comfort Tape Black is a black tissue tape with a modified acrylic adhesive
with siliconized liner.

It is used for sealing the joints when using PAROC Comfort and N1 faced products.
PAROC Comfort Tape B gives a great finish, safe installation and usage.

PAROC Comfort Tape White is an white tissue tape with a modified acrylic adhesive with siliconized liner.

It is used for sealing the joints when using PAROC Comfort and N1 faced products. PAROC Comfort Tape W gives a great finish, safe installation and usage.

PAROC Head Pin is designed for capacitor discharge welding devices for welding directly through the insulation.

The PAROC Head Pin fasteners allow the fixing in a single operation of non-aluminum faced insulation such as slabs or wired mats on metal surfaces (ventilation ducts, metal beams, metal industrial, ventilation or air condition equipment, etc.).

PAROC Head Pin Insulated is designed for capacitor discharge welding devices for welding directly through the insulation.

The PAROC Head Pin Insulated fasteners allow the fixing in a single operation of aluminum faced insulation such as lamella mats or wired mats on metal surfaces (ventilation ducts, metal beams, metal industrial, ventilation or air condition equipment, etc.).

PAROC HT Tape is a special-purpose high temperature protection tape featuring superior adhesive strength. Maximum  working temperature  is 350ºC (peak),  250ºC (continuously). 

It is an ideal for PAROC Fire Place Slabs and other high temperature applications. For this purpose, it is highly temperature resistant and age resistant. Use this aluminum tape for protecting, covering, insulating and repairing in combination with AluCoat and any aluminum surfaces. 

PAROC Hvac Dots are the optimal solution when it comes to cover pins’ heads. This is fast, clean, generates a good looking, smooth, gapless and tight insulation surface. No risk of condensation. It is also very easy to lift the single dot from the release paper.

Adhesive tape for surface materials and floor coverings with low flame spread characteristics (adhesives used in the construction of “A”, “B”, & “C” class divisions).

Pure aluminum adhesive tape with a very adhesive, highly shear resistant, and noncombustible polyacrylic adhesive of outstanding ageing resistance, as the polyacrylic adhesive does not dry out or embrittle. The strength of a bond with PAROC Marine Aluminum Tape increases over time and will not decrease with advanced age. The ideal combination of the aluminum backing and a polyacrylic adhesive which is optimized for the demands of bonding insulating material, guarantees the best adhesion and highest security for critical conditions. PAROC Marine Aluminum Tape is resistant against heat, cold, and humidity. For bonding of aluminum laminated mineral fiber insulation, pipes, and air ducts, for isolating against heat and cold, and for the sealing of containers and pipes during welding under protective gas.

Adhesive for sea going vessels complying with SOLAS 74/88 Reg. II-2/3. II-2/5, II-2/6 and II-2/9, as amended, IMO Resolution MSC. 36(63)-(1994 HSC-Code) 7, IMO Resolution MSC. 97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120.

PAROC LF1 Tape is an reinforced aluminum tape with a grey color lacquer finish and a modified acrylic adhesive with siliconized liner. 

It is ideal for sealing the joints when using PAROC Marine LF1 faced  products such as sections, lamella mats or slabs. The product  for sea going vessels complying with IMO FTP Code (ref. Ch. 5.2.1 and Ch. 8), Annex 1 part 2 and part 5 (IMO Resolution MSC. 307(88) Annex 1 Part 2 and Part 5).PAROC LF1 Tape gives a great finish and safe installation. 

PAROC capacitor discharge welding device PPWD has been designed for welding directly through the insulation. With this procedure, you fasten the insulation to the surface in one process step.