PAROC Cortex

Wind protection slab

PAROC Cortex
Wind protection slab PAROC Cortex is non-combustible stone wool insulation with an integrated non-combustible wind tight facing for existing and new well-ventilated external walls in high-rise buildings. The wind protection insulation slab can be used as an external layer in a two layer-system in combination with another thermal insulation layer. With a two-layer system you can create a continuous thermal insulation layer with staggered joints to improve the thermal performance of the wall. The wind protection slab is faced with a vapour permeable, windproof membrane which creates an excellent barrier against the weather. Good vapour permeability allows possible moisture to dry safely without causing condensation problems inside the construction. The joints should be sealed with a special tape in order to minimise air leakage.

Datasheet

 
Updated 29 Jun 2018

Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,-)-WS-WL(P)-Z(0,10)

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
1200 x 1800 mm30 - 70 mm
In accordance with EN 822In accordance with EN 13162
Dimensional Stability
PropertyValueAccording to
Dimensional Stability at Specified Temperature, DS(70,-)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Other Dimensions
Other sizes available on request.

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet or Loose Product on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2 - s1, d0EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityBase product non-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,033 W/mK EN 13162:2012 + A1:2015 (EN 13162 )
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Air Permeability
PropertyValueAccording to
Air Permeability Coefficient for Facing, L<10 x 10-6 m3/m2Pas  
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance Z0,10 m²hPa/mg EN 13162:2012 + A1:2015
Water Vapour Transmission MU, µNPD EN 13162:2012 + A1:2015

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
 
PropertyValueAccording to
Compressibility CPNPD EN 13162:2012 + A1:2015
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmtNPD EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Wind tight covering

Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,-)-WS-WL(P)-Z(0,10)

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
1200 x 1800 mm30 - 70 mm
In accordance with EN 822In accordance with EN 13162
Dimensional Stability
PropertyValueAccording to
Dimensional Stability at Specified Temperature, DS(70,-)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Other Dimensions
Other sizes available on request.

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet or Loose Product on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2 - s1, d0EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityBase product non-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,033 W/mK EN 13162:2012 + A1:2015 (EN 13162 )
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Air Permeability
PropertyValueAccording to
Air Permeability Coefficient for Facing, L<10 x 10-6 m3/m2Pas  
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance Z0,10 m²hPa/mg EN 13162:2012 + A1:2015
Water Vapour Transmission MU, µNPD EN 13162:2012 + A1:2015

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
 
PropertyValueAccording to
Compressibility CPNPD EN 13162:2012 + A1:2015
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmtNPD EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Wind tight covering

Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,-)-WS-WL(P)-Z(0,10)

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
1200 x 1800 mm30 - 70 mm
In accordance with EN 822In accordance with EN 13162
Dimensional Stability
PropertyValueAccording to
Dimensional Stability at Specified Temperature, DS(70,-)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Other Dimensions
Other sizes available on request.

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet or Loose Product on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2 - s1, d0EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityBase product non-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,033 W/mK EN 13162:2012 + A1:2015 (EN 13162 )
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Air Permeability
PropertyValueAccording to
Air Permeability Coefficient for Facing, L<10 x 10-6 m3/m2Pas  
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance Z0,10 m²hPa/mg EN 13162:2012 + A1:2015
Water Vapour Transmission MU, µNPD EN 13162:2012 + A1:2015

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
 
PropertyValueAccording to
Compressibility CPNPD EN 13162:2012 + A1:2015
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmtNPD EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Wind tight covering