PAROC BLT 7 (Blowing wool for cavity walls)
Blowing wool PAROC BLT 7 is non-combustible stone wool insulation for existing and new masonry cavity walls.
|
|
PAROC CGL 20cy (Ceiling lamella)
Ceiling lamella PAROC CGL 20cy is non-combustible stone wool insulation for existing and new cellar ceilings.
|
|
PAROC CGL 20cyc (Ceiling lamella)
Ceiling lamella PAROC CGL 20cyc is non-combustible stone wool insulation for existing and new cellar ceilings.
|
|
PAROC Cortex (Wind protection slab)
PAROC Cortex wind protection insulation board (lambda 0,033 W/mK) is a premium product for ventilated facades and roofs in all fire classes of buildings. Thin, large and rigid boards are ideal for double-layer insulation installations together with soft insulation slabs.
|
|
PAROC COS 10 (Concrete panel slab)
PAROC COS 10 is a thermal insulation slab (lambda 0.035W/mK) used in concrete sandwich elements. The insulation slab is attached to the element during factory casting. The compressive stress of the slab is 10 kPa which means that it can withstand a 1000 kg/m² load during casting.
|
|
PAROC COS 5 (Concrete panel slab)
PAROC COS 5 is a thermal insulation slab (lambda 0.035W/mK) used in concrete sandwich elements . The insulation slab is attached to the element during factory casting. The compressive stress of the slab is 5 kPa which means that it can withstand a 500 kg/m² load during casting.
|
|
PAROC eXtra (General Insulation slab)
PAROC eXtra is a multipurpose low-density insulation (lambda 0,036 W/mK) for wood and metal-framed exterior and partition walls, ventilated facades, pitched roofs and ventilated floors. In ventilated structures, the product is installed as a two-layer solution together with wind protection insulation.
|
|
PAROC eXtra plus (General insulation slab)
PAROC eXtra plus is a multipurpose insulation slab (lambda 0,034 W/mK) for ventilated facades, pitched roofs and ventilated floors. In ventilated structures, the product is installed as a two-layer solution together with wind protection insulation.
|
|
PAROC Fatio (Rendered facade slab)
Rendered facade slab PAROC Fatio is non-combustible stone wool insulation for use as a base layer of thick rendered facade in existing and new buildings.
|
|
PAROC Fatio Plus (Rendered facade slab)
Rendered facade slab PAROC Fatio Plus is non-combustible stone wool insulation for use as a base layer of thick rendered facade in existing and new buildings.
|
|
PAROC FPS 14 (Fire protection slab)
PAROC FPS 14 is a fire protection slab with a nominal density of ~140 kg/m³. The product can be used for fire protection applications, where sufficient product density serves as the selection criterion for the fire protection insulation.
|
|
PAROC FPS 14t (Fire protection slab)
Fire protection slab PAROC FPS 14t is non-combustible stone wool insulation for use as fire protection for steel structures, chimneys, doors, furnaces and ovens.
|
|
PAROC FPS 17 (Fire protection slab)
PAROC FPS 17 is a multi-purpose fire protection slab (nom. density 170kg/m3) for passive fire protection of e.g., load-bearing steel, wooden and concrete structures. The product is installed on the surface of the material to be protected either with screws or welding pins according to the separate installation instructions.
|
|
PAROC FPS 17a (Fire protection slab)
PAROC FPS 17a is a multi-purpose fire protection slab (nominal density 170kg/m³) coated with thin aluminum foil. It is used e.g. for passive fire protection of load-bearing steel, wood and concrete structures. The product is installed on the surface of the material to be protected either with screws or welding pins according to the separate installation instructions.
|
|
PAROC Linio 10 (Rendered facade slab)
Rendered facade slab PAROC Linio 10 is non-combustible stone wool insulation for use as a base layer for thin rendering facade in existing and new buildings.
|
|
PAROC Linio 15 (Rendered facade slab)
Rendered facade board PAROC Linio 15 is non-combustible stone wool insulation for use as a base layer of thin rendered facade around the openings of existing and new buildings.
|
|
PAROC Linio 80 (Rendered facade lamella)
Rendered facade lamella PAROC Linio 80 ombustible stone wool insulation for use as a base layer of thin rendered facade in existing and new buildings.
|
|
PAROC ROB 60 (Roof board)
Roof board PAROC ROB 60 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.
|
|
PAROC ROB 80 (Roof board)
Roof board PAROC ROB 80 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.
|
|
PAROC ROB 80t (Roof board)
Roof board PAROC ROB 80t is non-combustible stone wool insulation for use as a top layer insulation of existing and new flat roofs.
|
|
PAROC ROS 30 (Roof slab)
Roof slab PAROC ROS 30 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.
|
|
PAROC ROS 30g (Roof slab)
Roof slab PAROC ROS 30g is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new ventilated flat roofs.
|
|
PAROC ROS 50 (Roof slab)
Roof slab PAROC ROS 50 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.
|
|
PAROC ROS 60 (Roof slab)
Roof slab PAROC ROS 60 is non-combustible stone wool insulation for use as a load bearing thermal insulation layer of existing and new flat roofs.
|
|
PAROC ROS 70 (Roof slab)
Roof slab PAROC ROS 70 is non-combustible stone wool insulation for use as a top layer of existing and new flat roofs.
|
|
PAROC UNM 37 (General insulation mat)
PAROC UNM 37 is a soft insulation mat (lambda 0,037 W/mK) that is used to level uneven surfaces under the actual insulation layer. The product can also be used to insulate curved surfaces and joints.
|
|
PAROC WAB 10t (Wall board)
PAROC WAB 10t is a thin and rigid wind protection insulation board (lambda 0,036 W/mK), which is covered on one side with a thin fiberglass veil. It is used for wind protection of ventilated exterior walls in metal-framed industrial buildings. Thin large boards are used in two-layer insulation installations together with low-density insulation. The veil surface is installed in the direction of the ventilation gap.
|
|
PAROC WAS 25t (Wall slab)
Wall slab PAROC WAS 25t is non-combustible stone wool insulation for existing and new ventilated external walls.
|
|
PAROC WAS 35t (Wall slab)
Wall slab PAROC WAS 35t is non-combustible stone wool insulation for existing and new ventilated external walls.
|
|
PAROC WAS 50t (Wall slab)
PAROC WAS 50t is a wall insulation slab coated with light fiberglass veil (lambda 0,034W/mK) for lightly ventilated facades (e.g. brick facades) in all fire classes. Thin boards are used as wind protection in two-layer insulation installations together with low-density insulation, and thick boards in single-layer insulation installations.
|