PAROC Pro Wired Mat 680 Comfort

Paroc Pro Wired Mat Comfort
PAROC Pro Wired Mat 680 Comfort is a non-combustible stone wool mat with Comfort facing. It is commonly used for thermal insulation of cylindrical, conic and flat surfaces in different industrial applications.

Datasheet

 
Updated 2 Dec 2022

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+)680-WS1-CL10
Nominal Density
100 kg/m³
Maximum Service Temperature
PropertyValueAccording to
Maximum Service Temperature680 °C EN 14706

Surface temperature of the facing must not exceed 80°C.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 500/600/900/1000 mm, length 2000 - 8000 mm depending on thickness. mm30 - 120 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability680 °C EN 14303:2009+A1:2013 (EN 14706)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,035 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,051 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,059 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000,078 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000,102 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000,131 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000,167 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 680 °C, λ6800,196 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Comfort facing, galvanized wire mesh and sewing wire.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+)680-WS1-CL10
Nominal Density
100 kg/m³
Maximum Service Temperature
PropertyValueAccording to
Maximum Service Temperature680 °C EN 14706

Surface temperature of the facing must not exceed 80°C.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 500/600/900/1000 mm, length 2000 - 8000 mm depending on thickness. mm30 - 120 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability680 °C EN 14303:2009+A1:2013 (EN 14706)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,035 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,051 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,059 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000,078 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000,102 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000,131 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000,167 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 680 °C, λ6800,196 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Comfort facing, galvanized wire mesh and sewing wire.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+)680-WS1-CL10
Nominal Density
100 kg/m³
Maximum Service Temperature
PropertyValueAccording to
Maximum Service Temperature680 °C EN 14706

Surface temperature of the facing must not exceed 80°C.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 500/600/900/1000 mm, length 2000 - 8000 mm depending on thickness. mm30 - 120 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability680 °C EN 14303:2009+A1:2013 (EN 14706)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,035 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,051 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,059 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000,078 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000,102 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000,131 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000,167 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 680 °C, λ6800,196 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Comfort facing, galvanized wire mesh and sewing wire.
Symbol CE

PAROC® stands for energy-efficient and fire safe insulation products and solutions of stone wool for new and renovated buildings, HVAC, marine and offshore and other industrial applications. Behind those products there is an 80-year history of stonewool production knowhow backed with technical insulation expertise and innovation. We manufacture our products in Finland, Sweden, Lithuania and Poland, and deliver them to customers in our familiar red-and-white-striped packages. For more information please visit our About Paroc webpages.

Paroc Group Oy

Energiakuja 3 P.O BOX 240
00181 Helsinki, Finland
Tel. +358 46 876 8000

Follow Us:

© Paroc Group 2023