PAROC Pro Wired Mat 550

PAROC Pro Wired Mat 550

PAROC Pro Wired Mat 550 is a stone wool wired mat with galvanized net. Available also with stainless steel net; code W2 will be added after the product name.

Datasheet

 
Updated 18 Feb 2022

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+)600-WS1-CL10
Nominal Density
70 kg/m³
Maximum Service Temperature
PropertyValueAccording to
Maximum Service TemperatureIn Compliance with ASTM C547 1400 °F (760 °C) ASTM C447

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 500/1000 mm, length 2000 - 8000 depending on thickness. mm30 - 120 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability600 °C EN 14303:2009+A1:2013 (EN 14706)

Thickness
In Compliance with ASTM C592

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Other Fire Properties
PropertyValueAccording to
Fire Classification (Surface)Flame Spread index 0; Smoke Development Index 10 UL 723 ASTM E84, and CAN/ULC S102
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,037 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,042 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,049 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,057 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,067 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,079 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000,126 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000,166 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000,215 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Other Properties

Other Properties
PropertyValueAccording to
Metal Mesh Covered Mineral Fiber BlanketsType IVAASTM C592
.  
Surface Burning CharacteristicFlame Spread index 0UL 723 ASTM E84 and CAN/ULC S102
.Smoke Development Index 10 
.  
Maximum Service TemperatureIn Compliance with ASTM C592 1256 °F (680 °C)ASTM C447
.  
.In Compliance with ASTM C592 
Thickness ASTM C167
.100 kg/m3 
Density ASTM C167
.< 1,0% & 1256 °F (680°C) 
Linear Shrinkage, length and width ASTM C356
.< 0,5% by weight at 102 °F (49 °C), 95% RH 
Water Vapor Sorption ASTM C1104
.Results fall with acceptable limits 
LOI and Shot Content ASTM C1335
.Results fall with acceptable limits 
Chemical Analysis for CL-, FI-, Na+, SIO3 ASTM C795 and ASTM C871
.Noncombustible 
RtF ISO 1182
.According to below table 
. ASTM C177

Facings

Facing Material
Galvanized wire mesh and sewing wire.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+)600-WS1-CL10
Nominal Density
70 kg/m³
Maximum Service Temperature
PropertyValueAccording to
Maximum Service TemperatureIn Compliance with ASTM C547 1400 °F (760 °C) ASTM C447

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 500/1000 mm, length 2000 - 8000 depending on thickness. mm30 - 120 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability600 °C EN 14303:2009+A1:2013 (EN 14706)

Thickness
In Compliance with ASTM C592

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Other Fire Properties
PropertyValueAccording to
Fire Classification (Surface)Flame Spread index 0; Smoke Development Index 10 UL 723 ASTM E84, and CAN/ULC S102
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,037 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,042 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,049 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,057 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,067 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,079 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000,126 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000,166 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000,215 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Other Properties

Other Properties
PropertyValueAccording to
Metal Mesh Covered Mineral Fiber BlanketsType IVAASTM C592
.  
Surface Burning CharacteristicFlame Spread index 0UL 723 ASTM E84 and CAN/ULC S102
.Smoke Development Index 10 
.  
Maximum Service TemperatureIn Compliance with ASTM C592 1256 °F (680 °C)ASTM C447
.  
.In Compliance with ASTM C592 
Thickness ASTM C167
.100 kg/m3 
Density ASTM C167
.< 1,0% & 1256 °F (680°C) 
Linear Shrinkage, length and width ASTM C356
.< 0,5% by weight at 102 °F (49 °C), 95% RH 
Water Vapor Sorption ASTM C1104
.Results fall with acceptable limits 
LOI and Shot Content ASTM C1335
.Results fall with acceptable limits 
Chemical Analysis for CL-, FI-, Na+, SIO3 ASTM C795 and ASTM C871
.Noncombustible 
RtF ISO 1182
.According to below table 
. ASTM C177

Facings

Facing Material
Galvanized wire mesh and sewing wire.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+)600-WS1-CL10
Nominal Density
70 kg/m³
Maximum Service Temperature
PropertyValueAccording to
Maximum Service TemperatureIn Compliance with ASTM C547 1400 °F (760 °C) ASTM C447

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
Width 500/1000 mm, length 2000 - 8000 depending on thickness. mm30 - 120 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability600 °C EN 14303:2009+A1:2013 (EN 14706)

Thickness
In Compliance with ASTM C592

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Other Fire Properties
PropertyValueAccording to
Fire Classification (Surface)Flame Spread index 0; Smoke Development Index 10 UL 723 ASTM E84, and CAN/ULC S102
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,037 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,042 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,049 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,057 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,067 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,079 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 300 °C, λ3000,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 400 °C, λ4000,126 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 500 °C, λ5000,166 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 600 °C, λ6000,215 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Other Properties

Other Properties
PropertyValueAccording to
Metal Mesh Covered Mineral Fiber BlanketsType IVAASTM C592
.  
Surface Burning CharacteristicFlame Spread index 0UL 723 ASTM E84 and CAN/ULC S102
.Smoke Development Index 10 
.  
Maximum Service TemperatureIn Compliance with ASTM C592 1256 °F (680 °C)ASTM C447
.  
.In Compliance with ASTM C592 
Thickness ASTM C167
.100 kg/m3 
Density ASTM C167
.< 1,0% & 1256 °F (680°C) 
Linear Shrinkage, length and width ASTM C356
.< 0,5% by weight at 102 °F (49 °C), 95% RH 
Water Vapor Sorption ASTM C1104
.Results fall with acceptable limits 
LOI and Shot Content ASTM C1335
.Results fall with acceptable limits 
Chemical Analysis for CL-, FI-, Na+, SIO3 ASTM C795 and ASTM C871
.Noncombustible 
RtF ISO 1182
.According to below table 
. ASTM C177

Facings

Facing Material
Galvanized wire mesh and sewing wire.