PAROC Pro Section WR 120 AluCoat

PAROC Pro Section WR 100 AluCoat
PAROC Pro Section WR 120 AluCoat is a non-combustible stone wool pipe section for industrial pipe lines where the risk of CUI (corrosion under insulation) is present. 
PAROC WR products are an excellent tool for minimizing the risk of CUI, keeping the superior water repellent properties at temperatures up to 300 °C.
Paroc WR products are safe to use in combination with painting operations. 

PAROC pipe sections possess excellent compression strength and easily carry the weight of metal claddings. Hence, they eliminate the energy loss and thermal bridges caused by added cladding support structures and minimize the risk of damages from mechanical impacts.
 

 

Datasheet

 
Updated 29 Mar 2023
Download Datasheet (pdf)
Print Declaration of Performance (pdf)

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-MV2-CL10
Nominal Density
120 kg/m³

Surface temperature of the facing must not exceed 80 °C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
20 - 160 mm12 - 1016 mm1200 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Plastic packs on pallet

More Information

The superior water repellency of PAROC WR products up to 300°C reduces the risk of corrosion under insulation. PAROC WR products are also safe to use in combination with painting operations: PAROC WR products are 3rd party tested and certified according to the most stringent class of the LABS conformity (paint wetting impairment) standard, VDMA 24364.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2L - s1, d0EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
CombustibilityBase product non-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,038 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,041 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,047 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,063 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,085 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 400 °C, λ4000,110 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

PAROC WR Pipe Sections are providing very low water absorption < 0,1 kg/m² at temperatures up to 300°C according to EN 13472.

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

More Information

PAROC Section WR 120 can be used to satisfy the requirements as given in the tables for insulation thickness in BS5422:2009. Paroc can offer help and assistance to customers to confirm that the insulation systems proposed do in fact, achieve the necessary performance criteria. PAROC Section 120 WR conforms to BS3958-4.

Facings

Facing Material
Aluminium foil reinforced with a glass fibre net.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-MV2-CL10
Nominal Density
120 kg/m³

Surface temperature of the facing must not exceed 80 °C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
20 - 160 mm12 - 1016 mm1200 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Plastic packs on pallet

More Information

The superior water repellency of PAROC WR products up to 300°C reduces the risk of corrosion under insulation. PAROC WR products are also safe to use in combination with painting operations: PAROC WR products are 3rd party tested and certified according to the most stringent class of the LABS conformity (paint wetting impairment) standard, VDMA 24364.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2L - s1, d0EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
CombustibilityBase product non-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,038 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,041 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,047 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,063 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,085 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 400 °C, λ4000,110 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

PAROC WR Pipe Sections are providing very low water absorption < 0,1 kg/m² at temperatures up to 300°C according to EN 13472.

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

More Information

PAROC Section WR 120 can be used to satisfy the requirements as given in the tables for insulation thickness in BS5422:2009. Paroc can offer help and assistance to customers to confirm that the insulation systems proposed do in fact, achieve the necessary performance criteria. PAROC Section 120 WR conforms to BS3958-4.

Facings

Facing Material
Aluminium foil reinforced with a glass fibre net.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-MV2-CL10
Nominal Density
120 kg/m³

Surface temperature of the facing must not exceed 80 °C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
20 - 160 mm12 - 1016 mm1200 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Plastic packs on pallet

More Information

The superior water repellency of PAROC WR products up to 300°C reduces the risk of corrosion under insulation. PAROC WR products are also safe to use in combination with painting operations: PAROC WR products are 3rd party tested and certified according to the most stringent class of the LABS conformity (paint wetting impairment) standard, VDMA 24364.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2L - s1, d0EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
CombustibilityBase product non-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,038 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,041 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,047 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,063 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,085 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 400 °C, λ4000,110 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

PAROC WR Pipe Sections are providing very low water absorption < 0,1 kg/m² at temperatures up to 300°C according to EN 13472.

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

More Information

PAROC Section WR 120 can be used to satisfy the requirements as given in the tables for insulation thickness in BS5422:2009. Paroc can offer help and assistance to customers to confirm that the insulation systems proposed do in fact, achieve the necessary performance criteria. PAROC Section 120 WR conforms to BS3958-4.

Facings

Facing Material
Aluminium foil reinforced with a glass fibre net.
Symbol CE

PAROC® stands for energy-efficient and fire safe insulation products and solutions of stone wool for new and renovated buildings, HVAC, marine and offshore and other industrial applications. Behind those products there is an 80-year history of stonewool production knowhow backed with technical insulation expertise and innovation. We manufacture our products in Finland, Sweden, Lithuania and Poland, and deliver them to customers in our familiar red-and-white-striped packages. For more information please visit our About Paroc webpages.

Paroc Group Oy

Energiakuja 3 P.O BOX 240
00181 Helsinki, Finland
Tel. +358 46 876 8000

Follow Us:

© Paroc Group 2023