Products

PAROC Hvac Section AluCoat T

PAROC Hvac Section AluCoat T is a non-combustible stone wool pipe section for thermal and condensation insulation of pipework and air ducts in buildings and ships. It has a reinforced aluminium foil facing and tape in the longitudinal seam which prevents condensation and gives a quick installation.

Datasheet

Updated 15 Jun 2023

General

Certification Number

0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland

Designation Code

MW-EN 14303-T8/T9-ST(+)250-WS1-MV2-CL10

MED Type-Examination (Module B) certificates No. 74480/A0 and 74479/A0 and UK Type-Examination (Module B) certificates no. 74465/A0 and 74467/A0.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Thickness	Inner Diameter	Pipe Section Length
20 - 120 mm	12 - 612 mm	1200 mm
In accordance with EN 13467	In accordance with EN 13467	In accordance with EN 13467

Dimensional Stability
Property	Value	According to
Maximum Service Temperature - Dimensional Stability	250 °C	EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type

Cartons or plastic packs on pallet

Properties

Fire Properties

Reaction to Fire
Property	Value	According to
Reaction to Fire, Euroclass	A2_L - s1, d0	EN 14303:2009+A1:2013 (EN 13501-1)

Continuous Glowing Combustion
Property	Value	According to
Continuous Glowing Combustion	NPD	EN 14303:2009+A1:2013

Other Fire Properties
Property	Value	According to
Fire Classification (IMO)	Non-combustible	IMO 2010 FTP Code Annex 1 Part 1
Surface Flammability (IMO)	Low flame-spread charasteristics	IMO 2010 FTP Code Annex 1 Part 2 and 5
Combustibility	Base product non-combustible	EN ISO 1182

Thermal Properties

Thermal Resistance
Property	Value	According to
Thermal Conductivity in 10 °C, λ₁₀	0,033 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ₅₀	0,037 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ₁₀₀	0,044 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ₁₅₀	0,053 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ₂₀₀	0,064 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 250 °C, λ₂₅₀	0,077 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and Tolerances	T8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm	EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
Property	Value	According to
Water Absorption, Short Term WS, W_p	≤ 1 kg/m²	EN 14303:2009+A1:2013 (EN 13472)

Water Vapour Permeability
Property	Value	According to
Water Vapour Diffusion Resistance	MV2	EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
Property	Value	According to
Chloride Ions, Cl-	< 10 ppm	EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
Property	Value	According to
Sound Absorption	NPD	EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
Property	Value	According to
Release of Dangerous Substances	NPD	EN 14303:2009+A1:2013

General
Properties

Certification Number

0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland

Designation Code

MW-EN 14303-T8/T9-ST(+)250-WS1-MV2-CL10

MED Type-Examination (Module B) certificates No. 74480/A0 and 74479/A0 and UK Type-Examination (Module B) certificates no. 74465/A0 and 74467/A0.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

Dimensions

Dimensions
Thickness	Inner Diameter	Pipe Section Length
20 - 120 mm	12 - 612 mm	1200 mm
In accordance with EN 13467	In accordance with EN 13467	In accordance with EN 13467

Dimensional Stability
Property	Value	According to
Maximum Service Temperature - Dimensional Stability	250 °C	EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type

Cartons or plastic packs on pallet

Fire Properties

Reaction to Fire
Property	Value	According to
Reaction to Fire, Euroclass	A2_L - s1, d0	EN 14303:2009+A1:2013 (EN 13501-1)

Continuous Glowing Combustion
Property	Value	According to
Continuous Glowing Combustion	NPD	EN 14303:2009+A1:2013

Other Fire Properties
Property	Value	According to
Fire Classification (IMO)	Non-combustible	IMO 2010 FTP Code Annex 1 Part 1
Surface Flammability (IMO)	Low flame-spread charasteristics	IMO 2010 FTP Code Annex 1 Part 2 and 5
Combustibility	Base product non-combustible	EN ISO 1182

Thermal Properties

Thermal Resistance
Property	Value	According to
Thermal Conductivity in 10 °C, λ₁₀	0,033 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ₅₀	0,037 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ₁₀₀	0,044 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ₁₅₀	0,053 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ₂₀₀	0,064 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 250 °C, λ₂₅₀	0,077 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and Tolerances	T8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm	EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
Property	Value	According to
Water Absorption, Short Term WS, W_p	≤ 1 kg/m²	EN 14303:2009+A1:2013 (EN 13472)

Water Vapour Permeability
Property	Value	According to
Water Vapour Diffusion Resistance	MV2	EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
Property	Value	According to
Chloride Ions, Cl-	< 10 ppm	EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
Property	Value	According to
Sound Absorption	NPD	EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
Property	Value	According to
Release of Dangerous Substances	NPD	EN 14303:2009+A1:2013

Certification Number

0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland

Designation Code

MW-EN 14303-T8/T9-ST(+)250-WS1-MV2-CL10

MED Type-Examination (Module B) certificates No. 74480/A0 and 74479/A0 and UK Type-Examination (Module B) certificates no. 74465/A0 and 74467/A0.

Surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with heat resistance of adhesive).

Dimensions

Dimensions
Thickness	Inner Diameter	Pipe Section Length
20 - 120 mm	12 - 612 mm	1200 mm
In accordance with EN 13467	In accordance with EN 13467	In accordance with EN 13467

Dimensional Stability
Property	Value	According to
Maximum Service Temperature - Dimensional Stability	250 °C	EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type

Cartons or plastic packs on pallet

Fire Properties

Reaction to Fire
Property	Value	According to
Reaction to Fire, Euroclass	A2_L - s1, d0	EN 14303:2009+A1:2013 (EN 13501-1)

Continuous Glowing Combustion
Property	Value	According to
Continuous Glowing Combustion	NPD	EN 14303:2009+A1:2013

Other Fire Properties
Property	Value	According to
Fire Classification (IMO)	Non-combustible	IMO 2010 FTP Code Annex 1 Part 1
Surface Flammability (IMO)	Low flame-spread charasteristics	IMO 2010 FTP Code Annex 1 Part 2 and 5
Combustibility	Base product non-combustible	EN ISO 1182

Thermal Properties

Thermal Resistance
Property	Value	According to
Thermal Conductivity in 10 °C, λ₁₀	0,033 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ₅₀	0,037 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ₁₀₀	0,044 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ₁₅₀	0,053 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ₂₀₀	0,064 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 250 °C, λ₂₅₀	0,077 W/mK	EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and Tolerances	T8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm	EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
Property	Value	According to
Water Absorption, Short Term WS, W_p	≤ 1 kg/m²	EN 14303:2009+A1:2013 (EN 13472)

Water Vapour Permeability
Property	Value	According to
Water Vapour Diffusion Resistance	MV2	EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
Property	Value	According to
Chloride Ions, Cl-	< 10 ppm	EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
Property	Value	According to
Sound Absorption	NPD	EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
Property	Value	According to
Release of Dangerous Substances	NPD	EN 14303:2009+A1:2013