PAROC Hvac Slab GreyCoat

PAROC Hvac Slab GreyCoat
PAROC Hvac Slab GreyCoat is a non-combustible stone wool slab for thermal and condensation insulation of ventilation ducts and equipment. It has a reinforced grey aluminium foil facing.

Datasheet

 
Updated 26 Jun 2017

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T3-ST(+)250-WS1-MV2-CL10

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
600 x 1200 mm50 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability250 °C 14303:2009+A1:2013 (EN 14706)

Other Dimensions
Other dimensions subject to enquiry

Packaging

Package Type
Plastic Packs

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2 - s1, d0EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 0 °C, λ00,035 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,042 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,052 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,063 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,075 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,090 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Dimensions and TolerancesT5 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Durability

Durability of Reaction to Fire Against Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Durability of Thermal Resistance Against High Temperature
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T3-ST(+)250-WS1-MV2-CL10

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
600 x 1200 mm50 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability250 °C 14303:2009+A1:2013 (EN 14706)

Other Dimensions
Other dimensions subject to enquiry

Packaging

Package Type
Plastic Packs

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2 - s1, d0EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 0 °C, λ00,035 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,042 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,052 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,063 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,075 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,090 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Dimensions and TolerancesT5 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Durability

Durability of Reaction to Fire Against Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Durability of Thermal Resistance Against High Temperature
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Certification Number
0809-CPR-1016 / VTT Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN 14303-T3-ST(+)250-WS1-MV2-CL10

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
600 x 1200 mm50 - 100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability250 °C 14303:2009+A1:2013 (EN 14706)

Other Dimensions
Other dimensions subject to enquiry

Packaging

Package Type
Plastic Packs

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2 - s1, d0EN 14303:2009 (EN 13501-1)

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 0 °C, λ00,035 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,042 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,052 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,063 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,075 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,090 W/mK EN 14303:2009 +A1:2013 (EN 12667)
Dimensions and TolerancesT5 EN 14303:2009+A1:2013

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Durability

Durability of Reaction to Fire Against Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Durability of Thermal Resistance Against High Temperature
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.