PAROC Pro Segment 100 AluCoat

PAROC Pro Segment AluCoat
PAROC Pro Segment 100 AluCoat is a ready cut segment for medium and big size pipe elbows made of non-combustible stone wool pipe section. This industrial made insulation parts give the best insulation solution for big pipe elbows without heat bridges.

Datasheet

 
Updated 5 Sep 2023

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-MV2-CL10
Nominal Density
100 kg/m³

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30-160 mm114 - 914 mm1200 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Cartons or plastic packs on pallet.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2L - s1, d0EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO FTP Code Part 1
Surface Flammability (IMO)Low flame-spread characteristics IMO FTP Code Part 2 and 5

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Aluminium foil reinforced with a glass fibre net.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-MV2-CL10
Nominal Density
100 kg/m³

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30-160 mm114 - 914 mm1200 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Cartons or plastic packs on pallet.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2L - s1, d0EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO FTP Code Part 1
Surface Flammability (IMO)Low flame-spread characteristics IMO FTP Code Part 2 and 5

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Aluminium foil reinforced with a glass fibre net.

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-MV2-CL10
Nominal Density
100 kg/m³

Surface temperature of the facing must not exceed 80°C (temperature restriction determined in accordance with heat resistance adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30-160 mm114 - 914 mm1200 mm
In accordance with EN 13467In accordance with EN 13467In accordance with EN 13467
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

Packaging

Package Type
Cartons or plastic packs on pallet.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA2L - s1, d0EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO FTP Code Part 1
Surface Flammability (IMO)Low flame-spread characteristics IMO FTP Code Part 2 and 5

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Aluminium foil reinforced with a glass fibre net.
Symbol CE