PAROC Pro Bend 100

PAROC Pro Bend
PAROC Pro Bend 100 is a ready cut part for small pipe elbows made of non-combustible stone wool pipe section. Factory produced bends are a very good and fast insulation solution for pipe elbows.

Datasheet

 
Updated 15 Jun 2023

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-CL10

MED Type-Examination (Module B) certificate No. 74480/A0 and UK Type-Examination (Module B) certificate No. 74465/A0.

Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30 - 120 mm15 - 168Depending on pipe diameter
In accordance with EN 13467In accordance with EN 13467 
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

T8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm

Packaging

Package Type
Cartons on Pallet

More Information

Thermal insulation of pipe elbows in industrial pipework. Standard radius of other curve is 1,5 x outer diameter of pipe. Other dimensions available on request.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO 2010 FTP Code Annex 1 Part 1

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-CL10

MED Type-Examination (Module B) certificate No. 74480/A0 and UK Type-Examination (Module B) certificate No. 74465/A0.

Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30 - 120 mm15 - 168Depending on pipe diameter
In accordance with EN 13467In accordance with EN 13467 
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

T8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm

Packaging

Package Type
Cartons on Pallet

More Information

Thermal insulation of pipe elbows in industrial pipework. Standard radius of other curve is 1,5 x outer diameter of pipe. Other dimensions available on request.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO 2010 FTP Code Annex 1 Part 1

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T8/T9-ST(+)640-WS1-CL10

MED Type-Examination (Module B) certificate No. 74480/A0 and UK Type-Examination (Module B) certificate No. 74465/A0.

Nominal Density
100 kg/m³

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
ThicknessInner DiameterPipe Section Length
30 - 120 mm15 - 168Depending on pipe diameter
In accordance with EN 13467In accordance with EN 13467 
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability640 °C EN 14303:2009+A1:2013 (EN 14707)

T8 for outer diameter < 150 mm, T9 for outer diameter ≥ 150 mm

Packaging

Package Type
Cartons on Pallet

More Information

Thermal insulation of pipe elbows in industrial pipework. Standard radius of other curve is 1,5 x outer diameter of pipe. Other dimensions available on request.

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1L EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013
Other Fire Properties
PropertyValueAccording to
Fire Classification (IMO)Non-combustible IMO 2010 FTP Code Annex 1 Part 1

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 50 °C, λ500,039 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 100 °C, λ1000,045 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 150 °C, λ1500,054 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 200 °C, λ2000,064 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Thermal Conductivity in 300 °C, λ3000,092 W/mK EN 14303:2009+A1:2013 (EN ISO 8497)
Dimensions and TolerancesT8/T9 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 13472)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceNPD EN 14303:2009+A1:2013 (EN 13469)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013
Symbol CE