PAROC Hvac Mat AluCoat

Paroc Hvac Mat Alucoat
PAROC Hvac Mat AluCoat is a non-combustible stone wool mat. It is used for thermal and condensation insulation of circular and rectangular ventilation ducts. It has a reinforced aluminium facing.

Datasheet

 
Updated 30 Jan 2024
Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+/100)250-WS1-MV2-CL10

The surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with the heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
500, 1000 x 800030 mm
500, 1000 x 700040 mm
500, 1000 x 700050 mm
500, 1000 x 700060 mm
500, 1000 x 500070 mm
500, 1000 x 500080 mm
500, 1000 x 400090 mm
500, 1000 x 4000100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability(+/100)250 °C EN 14303:2009+A1:2013 (EN 14706)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 0 °C, λ00,034 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,046 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,060 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,075 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,115 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Reinforced aluminium foil
Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+/100)250-WS1-MV2-CL10

The surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with the heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
500, 1000 x 800030 mm
500, 1000 x 700040 mm
500, 1000 x 700050 mm
500, 1000 x 700060 mm
500, 1000 x 500070 mm
500, 1000 x 500080 mm
500, 1000 x 400090 mm
500, 1000 x 4000100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability(+/100)250 °C EN 14303:2009+A1:2013 (EN 14706)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 0 °C, λ00,034 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,046 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,060 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,075 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,115 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Reinforced aluminium foil
Certification Number
0809-CPR-1016 / Eurofins Expert Services Ltd, Kivimiehentie 4, FI-02150 Espoo. Finland
Designation Code
MW-EN 14303-T2-ST(+/100)250-WS1-MV2-CL10

The surface temperature of the facing must not exceed +80°C (temperature restriction determined in accordance with the heat resistance of adhesive).

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
500, 1000 x 800030 mm
500, 1000 x 700040 mm
500, 1000 x 700050 mm
500, 1000 x 700060 mm
500, 1000 x 500070 mm
500, 1000 x 500080 mm
500, 1000 x 400090 mm
500, 1000 x 4000100 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Maximum Service Temperature - Dimensional Stability(+/100)250 °C EN 14303:2009+A1:2013 (EN 14706)

Packaging

Package Type
Plastic Packs on Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 14303:2009+A1:2013 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 14303:2009+A1:2013

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Conductivity in 0 °C, λ00,034 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 10 °C, λ100,036 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 50 °C, λ500,046 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 100 °C, λ1000,060 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 150 °C, λ1500,075 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 200 °C, λ2000,093 W/mK EN 14303:2009+A1:2013 (EN 12667)
Thermal Conductivity in 250 °C, λ2500,115 W/mK EN 14303:2009+A1:2013 (EN 12667)
Dimensions and TolerancesT2 EN 14303:2009+A1:2013 (EN 823)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 14303:2009+A1:2013 (EN 1609)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Diffusion ResistanceMV2 EN 14303:2009+A1:2013 (EN 12086)

Rate of Release of Corrosive Substances

Trace Quantities of Water Soluble Ions and the pH Value
PropertyValueAccording to
Chloride Ions, Cl-< 10 ppm EN 14303:2009+A1:2013 (EN 13468)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 14303:2009+A1:2013 (EN ISO 354)

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 14303:2009+A1:2013 (EN 826)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 14303:2009+A1:2013

Durability

Durability of Reaction to Fire Against Ageing/Degradation
No change in reaction to fire properties for mineral wool products. The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of the product is related to the organic content, which cannot increase with time.
Durability of Reaction to Fire Against High Temperature
The fire performance of mineral wool does not deteriorate with high temperature. The Euroclass classification of the product is related to the organic content, which remains constant or decreases with high temperature.
Durability of Thermal Resistance Against Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Facings

Facing Material
Reinforced aluminium foil
Symbol CE Symbol Blauer Engel Eurofins Indoor Air Comfort - Certified product Symbol M1