PAROC eXtra

General Insulation slab

PAROC eXtra

PAROC eXtra is a multipurpose low-density insulation (lambda 0,036 W/mK) for wood and metal-framed exterior and partition walls, ventilated facades, pitched roofs and ventilated floors. In ventilated structures, the product is installed as a two-layer solution together with wind protection insulation.

The slab is fast to cut with knife or saw and easy to install in various frame structures and forms as it stays firmly in place without installation supports. The PAROC eXtra width of the product helps in tight installation of the insulation board against the frame.

Ready-made slab widths for metal (cc600) and wood-framed structures (cc600 / cc 900 / cc1200) minimizes the cuttingwork and waste. 

PAROC eXtra stone wool insulation contributes to enhanced fire resistance and sound insulation properties of structures (EC 5 calculations and ETA 07/0071, light partitions).

Datasheet

 
Updated 2 Feb 2024
Download Datasheet (pdf)
Download Declaration of Performance (pdf)
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T2-DS(70,-)-WS-WL(P)-MU1-AFr8

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
565 x 1220 mm50 - 150 mm
610 x 1220 mm42 - 150 mm
870 x 920 mm100 – 150 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability at Specified Temperature, DS(70,-)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)
Other Dimensions
Other sizes available on request.

Packaging

Package Type
Plastic Package or Big Pack

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0.036 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT2 EN 13162:2012 + A1:2015 (EN 823)
Air Permeability
PropertyValueAccording to
Air Permeability Coefficient, ℓ~ 85 x 10-6 m³/m*Pa*s EN 29053
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFR8 kPa*s/m² EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmtNPD EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T2-DS(70,-)-WS-WL(P)-MU1-AFr8

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
565 x 1220 mm50 - 150 mm
610 x 1220 mm42 - 150 mm
870 x 920 mm100 – 150 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability at Specified Temperature, DS(70,-)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)
Other Dimensions
Other sizes available on request.

Packaging

Package Type
Plastic Package or Big Pack

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0.036 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT2 EN 13162:2012 + A1:2015 (EN 823)
Air Permeability
PropertyValueAccording to
Air Permeability Coefficient, ℓ~ 85 x 10-6 m³/m*Pa*s EN 29053
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFR8 kPa*s/m² EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmtNPD EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T2-DS(70,-)-WS-WL(P)-MU1-AFr8

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000°C.

Dimensions

Dimensions
Width x LengthThickness
565 x 1220 mm50 - 150 mm
610 x 1220 mm42 - 150 mm
870 x 920 mm100 – 150 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability at Specified Temperature, DS(70,-)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)
Other Dimensions
Other sizes available on request.

Packaging

Package Type
Plastic Package or Big Pack

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0.036 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT2 EN 13162:2012 + A1:2015 (EN 823)
Air Permeability
PropertyValueAccording to
Air Permeability Coefficient, ℓ~ 85 x 10-6 m³/m*Pa*s EN 29053
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFR8 kPa*s/m² EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmtNPD EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Symbol CE Symbol EUCEB

PAROC® stands for energy-efficient and fire resilient insulation products and solutions of stone wool for new and renovated buildings, HVAC, marine and offshore and other industrial applications. Behind those products there is more than 80-year history of stone wool production knowhow backed with technical insulation expertise and innovation. We manufacture our products in Finland, Sweden, Lithuania and Poland, and deliver them to customers in our familiar red-and-white-striped packages. For more information please visit our About Paroc webpages.

Paroc Group Oy

Energiakuja 3 P.O BOX 240
00181 Helsinki, Finland
Tel. +358 46 876 8000

Follow Us:

© Paroc Group 2024