PAROC Linio 10

Rendered facade slab

PAROC Linio 10
Rendered facade slab PAROC Linio 10 is non-combustible stone wool insulation for use as a base layer for thin rendering facade in existing and new buildings. The rendered facade insulation slab has excellent thermal insulation and mechanical properties. It doesn't accumulate moisture or react to changes in temperature. With the rendered facade insulation slab you can easily create a smooth base layer for thin and thick rendering in case of an uneven surface of the supporting wall. At the same time, you will improve the sound insulation and increase the fire resistance of the external walls. Slabs are installed with red marks against the supporting wall with mortar adhesive and mechanical fasteners.

Datasheet

 
Updated 15 Feb 2022
Download Datasheet (pdf)
Download Declaration of Performance (pdf)
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,90)-CS(10)20-TR10-WS-WL(P)-MU1

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
Width x LengthThickness
600 x 1200 mm50 - 200 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability under Specified Temperature and Humidity Conditions, DS(70,90)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,036 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ1020 kPa EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmt10 kPa EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,90)-CS(10)20-TR10-WS-WL(P)-MU1

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
Width x LengthThickness
600 x 1200 mm50 - 200 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability under Specified Temperature and Humidity Conditions, DS(70,90)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,036 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ1020 kPa EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmt10 kPa EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,90)-CS(10)20-TR10-WS-WL(P)-MU1

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
Width x LengthThickness
600 x 1200 mm50 - 200 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability under Specified Temperature and Humidity Conditions, DS(70,90)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,036 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ1020 kPa EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σmNPD EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmt10 kPa EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.
Symbol CE

PAROC® stands for energy-efficient and fire resilient insulation products and solutions of stone wool for new and renovated buildings, HVAC, marine and offshore and other industrial applications. Behind those products there is more than 80-year history of stone wool production knowhow backed with technical insulation expertise and innovation. We manufacture our products in Finland, Sweden, Lithuania and Poland, and deliver them to customers in our familiar red-and-white-striped packages. For more information please visit our About Paroc webpages.

Paroc Group Oy

Energiakuja 3 P.O BOX 240
00181 Helsinki, Finland
Tel. +358 46 876 8000

Follow Us:

© Paroc Group 2024