PAROC Linio 80

Rendered facade lamella

PAROC Linio 80 Pallet
PAROC Linio 80 package
Rendered facade lamella PAROC Linio 80 is non-combustible stone wool insulation for use as a base layer of thin rendered facade in existing and new buildings. The lamella has excellent thermal insulation and alkali resistance properties. It doesn't accumulate moisture or react to changes in temperature. With rendered facade insulation lamella you can easily create a smooth base layer for thin rendering, improve the sound insulation and increase the fire resistance of walls. Lamellas are installed with adhesive mortar. Separate mechanical fasteners are not normally needed (check the system owner instructions).

Datasheet

 
Updated 3 Mar 2022
Download Datasheet (pdf)
Download Declaration of Performance (pdf)
Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,90)-CS(Y)50-TR80-WS-WL(P)-MU1

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
Width x LengthThickness
200 x 1200 mm50 - 440 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability under Specified Temperature and Humidity Conditions, DS(70,90)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Other thicknesses on request

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet or Loose Product on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,040 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σm50 kPa EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmt80 kPa EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Installation

Lamellas are installed with adhesive mortar. Separate mechanical fasteners are not normally needed (check the system owner instructions).

Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,90)-CS(Y)50-TR80-WS-WL(P)-MU1

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
Width x LengthThickness
200 x 1200 mm50 - 440 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability under Specified Temperature and Humidity Conditions, DS(70,90)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Other thicknesses on request

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet or Loose Product on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,040 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σm50 kPa EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmt80 kPa EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Installation

Lamellas are installed with adhesive mortar. Separate mechanical fasteners are not normally needed (check the system owner instructions).

Certification Number
0809-CPR-1015 / Eurofins Expert Services Ltd, P.O. Box 1001, FI-02044 VTT, Finland
Designation Code
MW-EN13162-T5-DS(70,90)-CS(Y)50-TR80-WS-WL(P)-MU1

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200 °C. The insulating properties remain unchanged, but the compressive stress weakens. The softening temperature of stone wool products is over 1000 °C.

Dimensions

Dimensions
Width x LengthThickness
200 x 1200 mm50 - 440 mm
In accordance with EN 822In accordance with EN 823
Dimensional Stability
PropertyValueAccording to
Dimensional Stability under Specified Temperature and Humidity Conditions, DS(70,90)≤ 1 % EN 13162:2012 + A1:2015 (EN 1604)

Other thicknesses on request

Packaging

Package Type
Plastic Package, Plastic Packages on a Pallet or Loose Product on a Pallet

Fire Properties

Reaction to Fire
PropertyValueAccording to
Reaction to Fire, EuroclassA1 EN 13162:2012 + A1:2015 (EN 13501-1)
Continuous Glowing Combustion
PropertyValueAccording to
Continuous Glowing CombustionNPD EN 13162:2012 + A1:2015
Other Fire Properties
PropertyValueAccording to
CombustibilityNon-combustible EN ISO 1182

Thermal Properties

Thermal Resistance
PropertyValueAccording to
Thermal Resistance See attachmentEN 13162:2012 + A1:2015
Thermal Conductivity λD0,040 W/mK EN 13162:2012 + A1:2015
Thickness Tolerance, TT5 EN 13162:2012 + A1:2015 (EN 823)
Direct Airborne Sound Insulation Index
PropertyValueAccording to
Air Flow Resistivity AFRNPD EN 13162:2012 + A1:2015 (EN 29053)

Moisture Properties

Water Permeability
PropertyValueAccording to
Water Absorption, Short Term WS, Wp≤ 1 kg/m² EN 13162:2012 + A1:2015 (EN 1609)
Water Absorption, Long Term WL(P), Wlp≤ 3 kg/m² EN 13162:2012 + A1:2015 (EN 12087)
Water Vapour Permeability
PropertyValueAccording to
Water Vapour Resistance ZNPD EN 13162:2012+A1:2015
Water Vapour Transmission MU, µ1 EN 13162:2012 + A1:2015 (EN 12086)

Sound Properties

Acoustic Absorption Index
PropertyValueAccording to
Sound AbsorptionNPD EN 13162:2012 + A1:2015 (EN ISO 354)
Impact Noise Transmission Index (for Floors)
PropertyValueAccording to
Dynamic Stiffness SDNPD EN 13162:2012 + A1:2015 (EN 29052-1)
CompressibilityNPD EN 13162:2012 + A1:2015

Mechanical Properties

Compressive Strength
PropertyValueAccording to
Compressive Stress at 10 % deformation CS(10), σ10NPD EN 13162:2012 + A1:2015 (EN 826)
Compressive Strength CS(Y), σm50 kPa EN 13162:2012 + A1:2015 (EN 826)
Point Load PL(5)NPD EN 13162:2012 + A1:2015 (EN 12340)
Tensile/Flexural Strength
PropertyValueAccording to
Tensile Strength Perpendicular to Faces TR, σmt80 kPa EN 13162:2012 + A1:2015 (EN 1607)

Emissions

Release of Dangerous Substances to the Indoor Environment
PropertyValueAccording to
Release of Dangerous SubstancesNPD EN 13162:2012 + A1:2015

Durability

Durability of Compressive Strength against Ageing/Degradation
PropertyValueAccording to
Compressive Creep CC(i1/i2/y)σc, XctNPD EN 13162:2012 + A1:2015 (EN 1606)
Durability of Reaction to Fire Against Heat, Weathering, Ageing/Degradation
The fire performance of mineral wool does not deteriorate with time. The Euroclass classification of product is related to the organic content, which cannot increase with time.
Durability of Thermal Resistance Against Heat, Weathering, Ageing/Degradation
Thermal conductivity of mineral wool products does not change with time, experience has shown the fibre structure to be stable and the porosity contains no other gases than atmospheric air.

Installation

Lamellas are installed with adhesive mortar. Separate mechanical fasteners are not normally needed (check the system owner instructions).

Symbol CE Symbol EUCEB

PAROC® stands for energy-efficient and fire resilient insulation products and solutions of stone wool for new and renovated buildings, HVAC, marine and offshore and other industrial applications. Behind those products there is more than 80-year history of stone wool production knowhow backed with technical insulation expertise and innovation. We manufacture our products in Finland, Sweden, Lithuania and Poland, and deliver them to customers in our familiar red-and-white-striped packages. For more information please visit our About Paroc webpages.

Paroc Group Oy

Energiakuja 3 P.O BOX 240
00181 Helsinki, Finland
Tel. +358 46 876 8000

Follow Us:

© Paroc Group 2024