|
PAROC insulation slabs made of stone wool are the best solution for the thermal insulation of storage tanks and other extensive cylindrical or level surfaces.
The following application properties are required from tank insulations:
• Good thermal insulating capacity in a broad temperature range.
• Low air permeability improving the thermal insulating capacity also in demanding conditions.
• High compression strength — no support structures causing cold bridges required in the tank roof.
• Good moisture repellence.
• Good installation properties.
• Non-combustible material withstanding high temperatures protecting both the property and the environment.
PAROC Tank Wall Slab 60 curves easily around cylindrical surfaces as follows:
|
Slab thickness |
Minimum diameter in mm of cylinder
when slab is bent |
|
mm |
in lateral direction |
in longit. direction |
|
50 |
3000 |
2000 |
|
80 |
5000 |
2500 |
|
100 |
6000 |
3000 |
|
120 |
6000 |
4000 |
|
140 |
6000 |
4000 |
When single layer insulations are used, the slab edges can be bevelled in order to obtain a tight and neat finish.
Tank wall insulation products
> PAROC Tank Wall Slab 60 (PAROC S)
> PAROC Tank Wall Slab 40 (PAROC SE)
Insulation for top roofs of the tanks
> PAROC Tank Roof Slab 90 (PAROC SKL)
Blowing wool for tanks with double wall construction
> PAROC Loose Wool Ind (PAROC TSV)
Note: In certain market areas the product names may vary. Please contact our sales personnel for further information |
